POM/ZH760/日本旭化成

詳細內容： POM/ZH760/日本旭化成PBT/VC112/resin/沙伯基礎PBT/Toraycon/1101G-X08/日本東麗PA66/FR15/美國杜邦/PA66/SE15CPA66/RC008/沙伯基礎PA6/K-FKMV5/C荷蘭DSMPOM/300PE美國杜邦PBT/750LD/日本寶理POM/C27021/美國塞拉尼斯PBT/711SA/日本寶理PBT/K4530/沙伯基礎（原GE）PA6/B36FPBT/LW9330/美國杜邦PBT/Celanex/531HS/美國塞拉尼斯PA6/PFW64/沙伯基礎PA66/A3ZG7HPPA66/RF005SXS/沙伯基礎PA6/1013NW8泰國宇部PA6/BKV30DUS000德國朗盛PA6/B3ZG4PBT/Crastin/FG6130/美國杜邦PBT/3318/泰科納PBT/SK662FR/美國杜邦POM/FK2:25/美國塞拉尼斯PA6/K-FKGS6荷蘭DSMPA6/BKV30H3.0德國朗盛PA6/N-40MF-0350日本旭化成POM/Lucet/HI-510/韓國LG化學PA66/A4HPA66/RFL36U/沙伯基礎PBT+PET/Lupox/SG3180S韓國LGPBT/SG-5150/韓國LGPBT/Crastin/S650FR/美國杜邦POM/LV450/日本旭化成PBT/4031/resin/沙伯基礎 POM/ZH760/日本旭化成 POM/ZH760/日本旭化成 PBT The rheological property of PET is better in the melting state, and the effect of pressure on the viscosity is larger than that of the temperature. Therefore, the flow of the melt is changed mainly from the pressure. 1, the treatment of plastics is due to the PET macromolecule containing lipid base, which has a certain hydrophilicity. The pellets are sensitive to water at high temperature. When the moisture content exceeds the limit, the molecular weight of PET decreases, and the products are colored and crisp. Therefore, it is necessary to dry the material before processing, and the drying temperature is 150, 4 hours, generally 170, 3-4 hours. The air - ejection method is used to test whether the material is completely dry. Generally, the proportion of the recycled material should not exceed 25%, and the recycled material should be completely dried. 2, PET is chosen for injection molding machine. Because of its short time after melting point and high melting point, it is necessary to choose injection system with more temperature control section and less friction heat when plasticizing, and the actual weight of products (water cut material) should not be less than 2/3 of machine injection volume. Based on these requirements, in recent years, Ramada has developed a small and medium-sized series of PET special plasticizing systems. The clamping force is selected by more than 6300t/m2. 3, mold and gate design, PET bottle embryo is usually molded by hot runner mold. Between the mold and injection molding machine template, it is best to have insulation panels, the thickness is about 12mm, and the heat insulation board will be able to withstand high pressure. The exhaust must be sufficient to avoid partial overheating or fragmentation, but the depth of the exhaust port is generally not more than 0.03mm, otherwise it is easy to produce the fly edge. 4, the temperature of the melt glue can be measured by air ejection method. At 270-295 degrees C, the enhancement level GF-PET can be set to 290-315 degrees C. 5, the injection speed is fast, and it can prevent the early solidification of the injection. But too fast, the high shear rate makes the material fragile. The ejection is usually completed in 4 seconds. POM/ZH760/日本旭化成PA12/AESN/Y/T6L/法國阿科瑪PA66/RD000/沙伯基礎PBT/Crastin/S600F40/美國杜邦POM/Tenac/LT804/日本旭化成PA6/CM3004G-30日本東麗PBT/VX4930/resin/沙伯基礎PA6/TLP1060日本東麗PA12/VESTAMID/EE62-S3/德國贏創(德固賽)PET/PBT/7062X/Resin/沙特sabicPA12/VESTAMID/L1833/德國贏創(德固賽)PA66/A3ZHPUVPBT/LW-5303F/韓國LGPC/PBT/553/Resin/沙特sabicPA6/H3CFPA66/A3HG7PA66/FR370POM/2013A/日本旭化成PA66/RF208/沙伯基礎POM/Lucet/FW-720F/韓國LG化學PA66/A27E01PBT/1184G-15/日本東麗PBT/ST820/美國杜邦POM/F20-03/韓國工程塑料PBT/70G30/日本寶理PA6/BKV135德國朗盛PA6/73G30HSL/美國杜邦POM/DURACON/TF-30/日本寶理PBT/K4560/沙伯基礎（原GE）PA12/1111/贏創德固賽PA6/K224-LGM35荷蘭DSMPBT/3100h/日本寶理PA6/2314HSPA66/1502(S)PA66/10B40/美國杜邦/POM/C9/沙伯基礎（原GE） POM/ZH760/日本旭化成 POM/ZH760/日本旭化成 6, the lower the back pressure, the better, so as to avoid wear. Generally not more than 100bar. It is usually not used. 7. Do not use too long detention time to prevent the decline of molecular weight. Try to avoid the temperature above 300 degrees centigrade. If the shutdown is less than 15 minutes. It is only required to do air - fire treatment; if more than 15 minutes, the viscosity PE should be cleaned and the barrel temperature is reduced to PE temperature until the machine is reopened. Recycling POM/ZH760/日本旭化成PBT/2100UV/泰科納PBT/Celanex/3100-2/美國塞拉尼斯PA66/RVL29/沙伯基礎PA12/Rilsan/ASR/30/法國阿科瑪POM/CH-15/日本寶理PC+PBT/Lupox/HI2303韓國LGPOM/KG002/沙伯基礎（原GE）PA66/80G43HS1L/美國杜邦/PBT/POCAN/A3131/德國朗盛PC+PBT/Lupox/LW5303F韓國LGPBT/SG-5200/韓國LGPA66/FR70G25V0/美國杜邦/POM/Hostaform/AM90SPlus/美國塞拉尼斯PA6/K-FHGM24荷蘭DSMPA66/11C140NC/美國杜邦//PA66/640PG5/臺灣南亞PBT/PBT/-GF50-01/泰科納POM/M25S/日本寶理PBT+PET/Lupox/SG5500韓國LGPBT/VANDAR2122/泰科納PBT/325/resin/沙伯基礎PBT/4302/泰科納PA66/RF006XXY/沙伯基礎PBT/Crastin/HR5330HFS/美國杜邦PBT/Ultradur/B4520/德國巴斯夫PBT/WL0049/compound/沙伯基礎PA66/A218S30PA66/114L/美國杜邦/PA66/RC003SXS/沙伯基礎PA6/PH0220AC/沙特sabicPOM/Tenac/CZH760/日本旭化成POM/Tenac/CZ3513/日本旭化成POM/4012/日本旭化成POM/DURACON/HP270X/日本寶理POM/M140-L1/泰科納 POM/ZH760/日本旭化成 POM/ZH760/日本旭化成 The recycling of German PET bottles to "Chinese sweaters" is also worth thinking, and there are about 8000000 PET bottles in the German market each year. The recycling company collected the bottles, crushed them into pieces or crushed them, and sold it to China at a relatively high price. According to the figures, a bottle of 16 liters of drink can be made into a sweater. Before 1993, all the plastic bottles were in the trash, a small part of the recycling. Since 4 years ago and the implementation of the tank fee, supermarket must recycle empty bottles, PET bottles, embarked on a journey to China, Wan Li: into synthetic crude wool sweater, and then returned to Germany, homecoming. China's textile industry has a huge demand for plastics. Although traders will add a bit more to the price of German recycling companies, imports are cheaper than their own raw materials. The transport from Hamburg to Hongkong was very low, because there were a lot of vacancies on the ship after the freighter came from China and unloaded the textile. The cost of production in China is very low, because the labor force is low, and the environmental and social standards are not perfect. In Chinese factories, these PET materials are classified according to color, cut into fragments and melted. After processing, PET bottles were returned to Germany in the form of textiles and sold in Germany. The value creation here is huge: a synthetic woolen sweater costs between 50 and 100 euros, and the material used is only 32 euro cents. The Far East can't see the end of the old plastic starvation. China has not been able to meet its needs with raw materials. In this context, second hand materials like PET are multiplied. Plastic empty bottles are used as raw materials in China, which shows that there is a world market of used raw materials in fact. 10 years ago, garbage was thrown into a garbage dump. "We were a consumer and discarding society." The example of China's processing Germany reselling illustrates the problem. "This market development shows to all consumers that some rubbish is indeed regenerated and reused." POM/ZH760/日本旭化成PA66/A3EG7PBT/Ultradur/B4520德國巴斯夫PBT/2402MT/泰科納PA6/K-FG12荷蘭DSMPA12/3020GX12/歐洲宇部PA6/F132-C荷蘭DSMPBT/Ultradur/B4300G4德國巴斯夫POM/HC350/日本旭化成PBT/Celanex/2401MT/美國塞拉尼斯PA6/BM25FN20700350/德國朗盛PA66/1330GPBT/TE-5011/韓國LGPA66/B50H1PA6/BKV115H2.0德國朗盛PA6/BKV330H2.0德國朗盛PBT/Lupo/GP2156FL韓國LGPA12/UBESTA/3014U/日本宇部POM/S9364/泰科納PA6/8262GHSPBT/POCAN/T7141/德國朗盛PBT/3325HRT/泰科納PA66/RX05050/沙伯基礎PA66/C3UPBT/POCAN/BF4409/德國朗盛PA6/C38FKAM/德國朗盛PA66/42A//美國杜邦/PA66/74G33L/美國杜邦/POM/100TE美國杜邦PBT/ASA/S/4090G6X/德國巴斯夫POM/H4320-Q600/德國巴斯夫PBT/STAT-KON/WE002/compound/沙伯基礎PA6/LE60ES法國阿科瑪PBT/S650FR/美國杜邦PBT/3300D/泰科納PA12/VESTAMID/LX9008/德國贏創(德固賽) POM/ZH760/日本旭化成 POM/ZH760/日本旭化成